Solid winter pool covers are far by the most common type sold today. They do a good job of protecting cold weather pools and retard the growth of algae as the temperature warms up before the start of a swimming pool.
Unfortunately, improper installation destroys several caches before they should require replacement. Improper installation is often the reason. Therefore, In that case you can hire professionals from companies like Pool Enclosures- Pool Covers.
Once your pool is drained at the appropriate level, blown lines, antifreeze and winter chemicals added it is time to cover. The proper way to install coverage is very similar if your pool is above ground or in the ground.
Place the lid on top of the pool and ensure that the material overlapping is still around. Once this is done the material instead of fixing in position.
For above ground pools this means threading the cable or loops and eyelets winch or tensioner. In ground pools, install the water bags or Aqua blocks by retaining loops sewn into the cover.
The next step is to form the cover on the pool sides around the perimeter. The idea is to have the cover lie above the pool water to support and stay on the sides to keep the wind from getting underneath.
Once the lid is properly in position, remove the hose and spray water on the cover to the depth of an inch or. This is to cover the bottom. At this point, you're almost done.
For above ground pools, tighten the tightest possible and get the wire cable under the top rail. For pools buried, fill water bags or blocks about two-thirds full of water and make sure they are secure.