It can be difficult to know what to do first when starting a project of interior house painting. This simple guide will make your interior paint job pleasant.
When painting a room always make a thorough preparation work before painting. After your preparation, painting the ceiling first, then the walls and finally the trim. To avoid any kind of hassle in painting jobs, it would be highly advisable to take help from the Sydney residential painters .
By rolling a ceiling, you are sure to sink the paint on the walls. You do not want to have the time spent painting walls and trim as touching ceiling projection sections.
Prepping comprises sanding, patching, priming and caulking. Sand the walls and moldings before painting. Sanding ensures good adhesion of the appropriate paint. The paint may peel a wall if it is not properly sanded.
The paint film needs something "grip" when applied. Scrape the old layer will give the new paint film much grip.
Patching should be your next task. Patching small holes and a damaged partition wall with mud dry for large holes and a ready brand patching compound for small holes.
Use a light finishing product for the fast drying time and less shrinkage. Sand the patches dry times. Do not use caulking for areas open to the side wall. Caulk flash and show through the paint finish.
The main task areas patched with a primer suitable for partition dryers. This will ensure the patches do not flash through your paint finish.